SINGER 401A User Manual

Page 88

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MULTI-SlOTTiD BINDER

ADJUSTING

LUG

SCROLL FOR

UNFOLDED

BINDING

SLOTS FOR

FOLDED

BIAS TAPE

GUIDE

CENTER SLOT

OF SCROLL

The multi-slotted binder is used to apply com

mercial binding as well as self fabric bias to an
unfinished fedge.

This colorful trim is attractive when applied

to children’s wear, aprons and fabric furnishings.
It is a practical finish for seam edges that ravel
and for making bound seams.

The

attachment

will

accommodate

both

straight and zigzag stitching.

SELECTOR: ALL SETTINGS

RED LEVER: 2 THRU 5
THROAT PLATE: GENERAL PURPOSE
MULTI-SLOTTED BINDER

Cut binding diagonally to form a long point.

Commercial binding in sizes 1 to 5 is inserted
from the right into the appropriate slot in the
scroll. Unfolded bias of an inch wide is in
serted into the opening at the end of the scroll.

Pull binding through scroll until the evenly

folded edges are under the needle. The free
length of the binding is held between the guide

pins.

Set Selector and Red Lever for either straight

or zigzag stitching.

Insert the edge to be bound into the center of

the scroll. The stitching is positioned close to
the edge of the binding by moving the scroll
portion of the attachment to the right or left by

means of the adjusting lug.