SINGER 401A User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
42
BUTTONHOLES
Stitching Procedure.
Set Selector and Red Lever. Place work under the needle,
aligning the center marking of buttonhole with center score line of foot.
To form side stitching, turn hand wheel toward you so the needle enters fabric
at point
A.
Lower foot and stitch to end of marking. Leave needle in fabric at
point
B.
Raise foot, pivot work oh needle. Lower foot. Take one stitch without
changing Red Lever setting, bringing work to point
C.
Adjust to Red Lever
setting for bar tacks and take no less than six stitches. Stop at point
D.
Readjust
to Red Lever setting for side stitching. Complete to point E, or approximately
six stitches from the end of the buttonhole. Move to Red Lever setting for bar
tacks and duplicate tack previously made, ending at point
F.