The edge stitcher, The tucker – SINGER 401A User Manual
Page 102
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

84
FASHION* AIDS
Available for separate purchase at your local SINGER CENTER
DARNING AND EMBROIDERY ATTACHMENT
Fabrics that require skillful hand
ling may be darned and embroid
ered with expert results when the
Darning Sind Embroidery Foot is
used.
This attachment is an aid to all
who desire perfection in free mo
tion embroidery and applique work.
The foot firmly holds the fabric as
the needle enters and rises from the
work, while fully revealing the line
of design to be followed.
THE GATHERING FOOT
Single or multiple rows of shir
ring can be quickly and expertly
placed with this attachment. Evenly
spaced shirring is insured as this
foot is designed to lock fullness into
each stitch. The amount of fullness
is very simply controlled by stitch
length and degree of tension.
Use straight stitch setting only.
THE EDGE STITCHER
This attachment, used with the straight
stitch setting, has slotted guides which
regulate placement of stitching at edge
of fabric.
Among its many applica
tions are the joining and inser
tion of lace, tucking from pin
width to 1/4", French seaming
and seam piping, facing and
seam finishing.
THE TUCKER
Since the beauty of
tucking lies in explicit
accuracy, the Tucker will
contribute greatly to the
attractiveness
of
this
work.
Tucks up to 1" may be
stitched and marked in
one operation.
Two adjustable scales
are provided to gauge
tuck width and spacing.
Use either straight or
decorative stitch setting.