The zipper foot, Appucations – SINGER 401A User Manual

Page 79

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THE ZIPPER FOOT

This foot is designed to facilitate the placement of stitch

ing close to a raised edge. The hinged feature of this foot
insures even feeding over pins, heavy layers of fabric or

cross seams. It is attached to the machine in place of the
regular presser foot, and may be adjusted to either the right
or left side of the needle. Straight stitch or zigzag settings
may be used.

APPUCATIONS

Zipper Insertions
Corded Seams

Tubular Cording

Slip Cover Welting

Preparation.

Secure the zipper foot to the

presser bar as you would the regular presser foot.

Set Selector and Red Lever, Adjustment to the
right or left of the needle is made by loosening

the thumb screw at the back. Check the position
of the foot by lowering the needle into the side
notch, making sure it clears the foot. Lock it
into position by tightening the thumb screw.