SINGER W2135 - Manual (Page 9)

THREADING THE
BOBBIN CASE
Step 1 (illustrated in Fig. 6).
Hold bobbin case between tbumb
and forefinger of left band, so that
tbe slot in tbe edge of the bobbin
case is on top. Take tbe bobbin
between thumb and forefinger of
right band so that tbe thread on
top leads from left to right. Step
2. Insert bobbin into bobbin case,
pull tbe thread into tbe slot of tbe
bobbin case as shown in Fig.7, and
draw it under the tension spring
and into tbe fork-shaped opening
of the spring as shown in Fig. 8
Fig. 6
Fig. 7
Fig. 8
r- -X ' . V-:-.«---------
:• -i,- c.
- "1^. ft
> .--vd-
^ ; ........................................