H£ss£;2su, Removing the work, Creative embroidery – SINGER W2135 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
;;-;-2-h£sS£;2Su
14
REMOVING THE WORK
Be
sure
to
stop
the
machine
when
the
thread
take-up
lever and needle bar are located at the highest position.
Now raise the presser foot and draw the fabric back and
to the left, Fig. 21-A and B, and pass the threads over the
thread cutter.
Pull
down
slightly,
holding
thread
in
both
hands,
so
as
not to bend the needle.
Leave the ends of thread under the presser foot.
CREATIVE EMBROIDERY
Be sure zigzag presser foot and zigzag needle plate are
in place.
The
satin
stitch,
Fig.
22,
which is really just a very short
zigzag stitch, and the basis for
Fig. 22
most
embroidery,
is
obtained
by
setting
the
stitch
length
as
near 0 as possible without stopping the feeding action.
The width may be set anywhere from just past 0 to the
widest, 4.
Fig. 21-A
Fig. 21-B