Embroidering with a hoop – SINGER W2135 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
16
E. Drop feed, lock stitch width at 4, take 3 or 4 stitches, leave needle in fabric left of stitches.
Pivot fabric on needle to make next daisy petal. Continue until flower design is complete.
Lock threads by setting stitch width at 0 and taking 3 or 4 stitches in center of design.
EMBROIDERING WITH A HOOP
It is easy to follow a stamped design or to work
free hand when embroidering or monogramming.
(See
Fig.
24).
Release
the
pressure
from
the
foot
by
pressing
down
the
snap
lock
on
the
automatic
darner. Turn the drop feed knob to "DARN" posi
tion.
Stretch
the
fabric
in
an
embroidery
hoop,
and
place
under
the
needle
after
removing
the
presser
foot. Set the stitch width at the size you prefer and
lower
the
presser
bar
lifter.
Then
operate
the
machine
at
a
rather
high
speed
while
moving
the hoop slowly with both hands. Work carefully and be sure to keep fingers out of the path
of the needle.