Onkyo TX-SR601 - Manual (Page 66)

Using remote controller
Controlling an Onkyo MD recorder
STANDBY
SAT/MD MODE
VOL m
MUTING
MD
operation
buttons
Numeric keys
ENTER
The RI connector of the Onkyo MD recorder must be connected to
the TX-SR701/701E/60i/601E (see page 24).
1. Press the SAT/MD MODE button.
The SAT/MD MODE button lights.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control an Onkyo MD recorder.
Operation buttons;
ON: I urns on and off MD player (same as STANDBY button on
the remote controller)
C02: Track down
CCil: Track up
O; Play
n; Slop
<]il: Skip backward
K>: Skip forward
REC •: Record
B3: Pause
±: Eject
1 to 9, 0, : Numeric keys
ENTER: Enters the settings
You may also use the following buttons;
VOL m: Adjusts volume atTX-SR701/70fE/601/60JE
MUTING; Activates muling function at TX-SR70i/701E/601/60iE
Note:
The SAT/MD button is used for opei'ating satellite tuners and
Onkyo MD recorders. Be aware that if you enter the preset code for
a satellite tuner as shown on page 65, then this button cannot be
used to operate Onkyo MD recorders.
If this is the case, to operate an Onkyo MD recorder, you must first
erase the satellite tuner code by following the directions given in
“Erasing all the commands programmed under a MODE button” on
page 72.
66