Sears OVERLOCK 3/4D 385.16631 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing the Light Bulb
SECTION 4. CARE FOR YOUR fVlACHlNE
(T) Disconnect the machine from the power
supply.
Remove the face plate set screw, and remove
the face plate.
CAUTION!
The
light
bulb
will
be
HOT,
Protect your fingers when you
handle it.
(
2
) Push the bulb up and turn the bulb counter
clockwise to remove it.
(
3
) Put the new bulb in by pushing it up and
turning it clockwise.
(T) Attach the face plate, and tighten the face plate
set screw.
For your safety^
* The machine is designed to use a 15 WATT MAXIMUM LIGHT BULB.
39