Sears OVERLOCK 3/4D 385.16631 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTIOM 2. PREPARE YOUR MACHINE FOR SEWING
(
4
) Insert the thread between tension discs from
the right. Then pull both sides of thread.
(i) Pass the thread through upper looper thread
guide (1).
@ Pass the thread through upper looper thread
guide (2).
(
7
) Turn the hand wheel toward you until the
upper looper comes to the middle position of
its travel, then pass the thread through the
looper thread take-up lever (upper).
(§)
guide.
Pass the threader through
looper. Then hook the
threader. Pull out the
thread through the hole,
from threader, and draw
10 cm (4") or more.
the hole on the upper
end of thread on the
threader to pass the
Remove the thread
the free end of thread
13