Sears OVERLOCK 3/4D 385.16631 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 3.
Pin Tucking
LEARN THE STITCHES
< AppUcation >
Thread, Fabric, Range of the Tension and Machine Setting
f
Fabric
\
Thread
Light
to
Medium
Fabric
V
Needle
thread
on the right
Synthetic: No. 60 ~ 80
Silk : No. 50-80
Upper
and lower
looper
threads
Synthetic
:
No. 60— 100
Silk
:
No. 50-100
............ /
/
Machine
Setting
Stitch
length
\
R
Differential
feed
ratio
1.0
Needle
plate
Rolled hemming needle plate.
(Marked R on reverse side.}
Needle
HA-1 SP No. 11
J
36
Refer to pages 24 ~ 25 and 33 (Narrow Hemming}
for thread tension balance adjustment.
Sewing
Remove the needle on the left.
Disengage the upper knife. {Refer to page
29.}
Sew the folded edge while guiding along the
right side edge of lower knife.
Press the pin tucks to one side.
* Engage the upper knife. (Refer to page
29.)