Sears OVERLOCK 3/4D 385.16631 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
)1M ■ 2.' : PREPARE YOUR MACHINE FOR SEWING
Thé Position of Telescoping Thread Guide Bar
Attaching the Spdpi Cap arid Net
(T) Pull the telescoping thread guide bar up as
far as it will go.
@ Turn the thread guide bar until it clicks into
position.
Thread guides should stop directly above the
spool pins.
Spool cap
Spool holder
Jill
,Slit
I___;
[ Spool pin
(?) When you use a small thread spool, remove the spool holder from the spool pin. Then place the spool
with its slit side up, and put spool cap on top.
If the thread slips down from the spool during threading and/or sewing, put a net on the spool as
illustrated for preventing jamming. The nets are supplied with the machine.