Sears 113.23611 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
B. To turn machine on, place finger under switch lever
and puH end of switch out.
To turn machine OFF...PUSH lever in.
NEVER LEAVE THE MACHINE UNATTENDED
UNTIL IT HAS COME TO A COMPLETE STOP.
To lock switch in OFF position... hold switch IN with
one hand...REMOVE key with other hand.
WARNING; FOR YOUR OWN SAFETY, ALWAYS
LOCK THE SWITCH “OFF” WHEN MACHINE IS
NOT IN USE.. .REMOVE KEY AND KEEP IT IN A
SAFE PLACE...ALSO...IN THE EVENT OF A
POWER FAILURE (ALL OF YOUR LIGHTS GO
OUR TURN SWITCH OFF... REMOVE THE KEY
AND STORE IT REMOTE FROM THE SCOLL Sjm.
THIS WILL PREVENT THE MACHINE FROM
STARTING UP AGAIN WHEN THE POWER
COMES BACK ON.
6
.
TABLE LOCK KNOB.
.. Loosening the knob aJIows table to
be tilted up to 45“ for bevel cutting. Tightening the knob
locks the table in the position you have selected.
7.
BEVEL POINTER.
.. indicates what angle you have selected
on the bevel scale.
a BEVEL SCALE
... Used to set the approximate table angle
for bevel cutting.
13