Sears 300 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
43. Remove the decals from the Decal Sheet (not shown) and apply them to the SYSTEM 300 as shown in the
diagram below.
44. Make sure that all parts are correctly assembled and tightened. Use of the remaining parts will be explained
in USING THE SYSTEM 300, beginning on page 18 of this owner’s manual.
Before using the SYSTEM 300, pull the end of each cable a few times to make sure that the cables move
smoothly. If the cables bind, correct the problem before using the SYSTEM 300. See the CABLE
DIAGRAMS on pages 22 and 23 of this owner's manual to make sure that the cables are properly routed.
IMPORTANT: If the cables have been incorrectly routed, they will be damaged when heavy weight is
used.
17