Sears 300 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
40. Insert the Press Seat Frame (36) into the Frame
(80). Attach the Press Seat Frame with a 3/8” x
2 1/4” Carriage Bolt (8) and a 3/8” Knob (105).
The Press Seat Frame can be attached at any of
four heights.
41. Attach a Backrest (39) to the Frame (80) with two
1/4” X 2 1/2” Bolts (94) and two 1/4” Flat Washers
/ A r\\
42. Make sure that there are two 5” Grips (25) on the
Lat Bar (96). If there are not, wet the ends of the
Lat Bar with soapy water, and slide a Grip onto
each end.
16