Sears 580.32601 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BEFORE STARTING THE ENGINE
1. Disconnect
Fue! Line
2. Remove Filler Cap
1. Make sure engine crankcase has been pro
perly filled with the recommended oiK See
LUBRICATION on Page 8.
2.
Fill gas tank with clean, fresh, NON
LEADED gasoline. (Leaded, REGULAR grade
gasoline is an acceptable substitute.)
A
DANGER
Gasoline vapors are highly flammable and explosive. Do not permit smoking, open flame, or
sparks in the vicinity while filling gas tank. Do not allow gasoline to spill on any hot surface.
KNURLED FITTING
MALE FITTING
TANK FILLER CAP
/
3. Connect fuel supply hose to gas tank outlet
fitting. Pull back on the knurled sleeve, insert
hose fitting over tank outlet fitting and let the
sleeve snap into place to lock.
4.
Turn gas tank filler cap one-half turn
counterclockwise to vent tank.
14