Sears 113.244501 - Manual (Page 15)

9 Wrench Holder Keeps 1/8" Hex '*L" Wrench
conveniently located for blade guide adjustments
10 ON-OFF SWITCH» The On-Off Switch has a lock­
ing feature THIS FEATURE IS INTENDED TO
HELP PREVENT UNAUTHORIZED AND POSSI­
BLY HAZARDOUS USE BY CHILDREN AND
OTHERS
a To turn machine on. insert key into switch
NOTE: Key is made of yellow plastic; locate in loose
parts bag
b Insert finger under switch lever and pull end of
switch out
c To turn machine OFF PUSH lever in
NEVER LEAVE THE MACHINE UNATTENDED
UNTIL IT HAS COME TO A COMPLETE STOP.
d To lock switch in OFF position ., hold switch IN
with one hand REMOVE key with other
hand
WARNING: For your own safety, always lock
the switch “OFF” when machine is not In
u s e . , . remove key and keep it in a safe
p l a c e . . . a l s o . . . in the event of a power failure
(all of your lights go out) turn switch o f f . . .
remove the key and store it away from
band saw. This will prevent the machine
from starting up again when the power
comes back on.
15