Canon BJC-3000 - Manual (Page 55)

■ Print a nozzle check pattern to confirm the success of normal print head cleaning.
(
➡ p.49 or p.50)
If normal print head cleaning does not correct the problem, perform deep print
head cleaning.
➀
Open the Printer Properties dialogue box, then click the
Maintenance tab.
➁
Click the deep print head cleaning icon in the Print
Head Cleaning box.
➂
When a confirmation message appears, click the OK
button.
The POWER lamp starts flashing and print head clean-
ing begins. It takes approximately 1 to 2 minutes until
the POWER lamp stops flashing and the deep print
head cleaning operation is completed.
➀
Select Page Setup from the File menu, then click
the Utilities button.
➁
Select Print head deep cleaning.
Routine Maintenance
53