Canon BJC-3000 - Manual (Page 69)

67
Printing Stops in mid-job
Cause:
The print job is a finely detailed photograph or illustration.
Solution:
Check the POWER lamp.
If the POWER lamp is slowly flashing green, the printer is operating normally. The printer requires more time
to process a finely detailed illustration or photograph.
Cause:
Printer has been operating for a long time.
Solution:
Interrupt printing at a convenient point, switch the printer off and wait for at least 15 minutes for the printer to
cool.
The print head may occasionally overheat during a long print job. If the print head overheats, printing will
pause at the end of a pass across the page to allow time for the print head to cool and then will restart after
a brief interval.
To avoid minor burns, never touch the print head or the surrounding area.
Troubleshooting