Phoenix Audio Spider MT505 SIP Administraor Guide - Manual (Page 8)

The user can select a Static IP option or a DHCP Automatic IP address. If a unit is set with a static IP
address, and the user, for some reason, does not know what it is, he can always reset the system to
default back to the DHCP IP option through the unit’s display.
The Quick Setup screen contains the following fields:
LAN Setup
IP Type {Static of dynamic – DHCP}
IP Address
Subnet Mask
Default Gateway Address
Primary DNS
Secondary DNS
Note: if automatic IP (DHCP) option is selected these data is determined by the DHCP server and cannot
be changed by the user.
SIP Proxy and Registrar
Use SIP Proxy {default: Enables}
Proxy IP Address or Host Name {to be entered for proper provisioning}
Proxy Port
{default 5060}
Use SIP Proxy IP and Port for Registration
Use SIP Registrar
Line Settings
Line Activate {default: enabled}
User ID
{to be entered for proper provisioning}
Authentication User Name {to be entered for proper provisioning}