Phoenix Audio Spider MT505 SIP Administraor Guide - Manual (Page 4)

2. Manual provisioning
As a default - the Spider comes pre-loaded with a default configuration file. The user has to enter the
registration information using the unit’s Web GUI:
- Connect the unit to your network; the unit searches for an IP address and will notify you (on its
display) when an IP is obtained. If you missed the address and it disappeared from the screen
too quickly, simply click on the menu button and then 0.
- From a computer which is connected to the same
network as the phone, type the IP address on your
browser’s address window.
- When prompt with the opening screen of the GUI, type
admin as the user name and 1234 as the password.
- Go to Quick Setup, enter the user ID, user name,
password, and the SIP proxy address. This information
is provided by the service provider when you sign up
for the telephone line. You can set the text that will be
displayed on the Spider’s display while nit in a call.
- Click Submit.
- Wait until the unit is registered and start using it