H-B Instrument 238 User Manual
H-B Instrument Clock

ENGLISH
DESCRIPTION:
DURAC
®
Analog Clock with Temperature
PRODUCT SPECIFICATIONS
Temperature display format switch (°C/°F)
Indoor temperature range: 0°C to 50°C
Outdoor temperature range: -20° to 60°C
Outdoor temperature with RF: up to 3 channels.
Indoor/Outdoor temperature trend Indicator.
Indoor/Outdoor max and min temperature records function.
Outdoor temperature upper/lower limited alert.
KEY FUNCTIONS
DowN/CF
Press to switch between °C/°F or to move back while in the setting mode
UP
Press to move forward while in the setting mode
MAX/MIN
Press to check maximum and minimum temperature. Hold for 2 seconds to clear all
temperature
records
ALERT
Press to switch the temperature alarm on/off. Hold the “ALERT” key for 2 seconds
to enter the temperature alarm setting
CHANNEL
Press to switch the RF channel, CH1 --> CH2 --> CH3 --> CH1. Hold the “Channel”
key for 2 seconds to clear all data from the current “Channel”
OPERATION
Temperature alarm setting
1. Hold the “ALERT” key for 2 seconds to switch to the ALERT setting
2. Setting sequence: upper limit --> lower limit --> exit
3. Press the “CHANNEL” key to change to a different channel when setting the upper limit and lower
limits.
4. The default for the upper limit is: +70°C, for the lower limit is -50°C
5. While setting, the indicator will flash at 1Hz intervals
6. Press the “ALERT” key to confirm the end of the setting, and then start the next channel.
7. Press the “Up” key one time, the setting will advance one step; when the key is held for 2 seconds, it
will advance by 8 steps/second.
8. Press the “Down/CF” key one time, the setting will move back one step; when the key is held for 2
seconds, it will move back by 8 steps/second.
9. The system will automatically exit if no key is pressed for a period of 5 seconds.
10. Alert will automatically turn on when set.
Power-on and reset
When Power-On and reset, LCD full display for 3 seconds --> “Beep” --> enter the normal state 3 minute
after receiving RF
RF receiving function
1. After installing the battery and checking the temperature, the clock will automatically enter the RF
receiving state for 3 minutes.
2. At the normal display mode, hold the “Channel” key for 2 seconds to clear the current channel
information.
3. If no signal with the same ID code is received for the current channel in 35 minutes, the temperature
of that “CH” will show “--.-“.
4. After receiving the RF signal, it will sound and the antenna symbol will flash until the data is
received.
FRANÇAIS
DESCRIPTION: Horloge analogique
DURAC
®
avec température
CARACTéRISTIqUES DU PRODUIT
Le format d’affichage de la température peut passer de °C à °F et inversement
Plage de températures intérieures : 0° C à 50° C
Plage de températures extérieures : -20° à 60° C
Températures extérieures avec RF : jusqu’à 3 chaînes.
Indicateur de tendance de températures intérieures/extérieures.
Fonction d’enregistrement des températures max et min intérieures et extérieures.
Alerte de limite de température extérieure plus élevée/moins élevée.
FONCTIONS CLéS
DowN/CF
Appuyez pour passer de °C à °F et inversement ou pour revenir en arrière en mode
réglage
UP
Appuyez pour avancer en mode réglage
MAX/MIN
Appuyez pour vérifier les températures maximum et minimum. Appuyez pendant 2
secondes pour effacer toutes les archives de températures
ALERT
Appuyez pour allumer/éteindre l’alarme de température. Maintenez la touche «
ALERTE » appuyée pendant 2 secondes pour régler l’alarme de température
CHANNEL
Appuyez pour changer de chaîne RF, CH1 --> CH2 --> CH3 --> CH1
Maintenez la touche « Channel » (« Chaîne ») appuyée pendant 2 secondes pour
effacer toutes les données de la « Chaîne » actuelle
UTILISATION
Réglage de l’alarme de températures
1. Maintenez la touche « ALERT » appuyée pendant 2 secondes pour régler l’alarme de température
2. Régler la séquence : limite supérieure --> limite inférieure --> sortie
3. Appuyez sur la touche « CHANNEL » pour passer à une chaîne différente lors du réglage des limites
supérieures et inférieures.
4. La limite supérieure par défaut est : +70° C, la limite inférieure est de -50° C
5. Lors du réglage, l’indicateur clignote à intervalles de 1 Hz
6. Appuyez sur la touche « ALERT » pour confirmer la fin du réglage, puis passez à la chaîne suivante.
7. Appuyez une fois sur la touche « Up » le réglage avancera d’une étape ; lorsque vous appuyez sur la
touche pendant 2 secondes, le réglage avance de 8 étapes/seconde.
8. Appuyez une fois sur la touche « Down/CF » le réglage reculera d’une étape ; lorsque vous appuyez
sur la touche 2 secondes, le réglage recule de 8 étapes/seconde.
9. Le système s’annule automatiquement si aucune touche n’est pressée pendant 5 secondes.
10. L’alerte s’allume automatiquement lorsqu’elle est réglée.
Mise sous-tension et réinitialisation
Lors de la mise sous-tension et de la réinitialisation, l’écran LCD s’affiche entièrement pendant 3
secondes --> « Bip » --> entrez l’affichage normal 3 minutes après avoir reçu RF
Fonction de réception RF
1. Après avoir installé la batterie et vérifié la température, l’horloge passera automatiquement à l’état
de réception RF pendant 3 minutes.
2. Dans le mode d’affichage normal, maintenez la touche « Channel » appuyée pendant 2 secondes pour
effacer les informations actuelles de la chaîne.
3. Si aucun signal avec le même code d’identification n’est reçu pour la chaîne actuelle pendant 35
minutes, la température de cette chaîne montrera « --.- ».
4. Après avoir reçu le signal RF, un son sera entendu et le symbole antenne clignotera jusqu’à ce que les
données soient reçues.
DEUTSCH
BESCHREIBUNG:
DURAC
®
Analoguhr mit Temperaturanzeige
PRODUKTSPEzIFIKATIONEN
Temperaturanzeigeformat-Umschaltung (°C/°F)
Innentemperaturbereich: 0 °C bis 50 °C
Außentemperaturbereich: -20 °C bis 60 °C
Außentemperatur mit RF: bis zu 3 Kanäle.
Innen-/Außentemperatur-Trendanzeiger.
Aufzeichnungsfunktion für höchste und niedrigste Innen-/Außentemperatur.
Eingeschränkter Alarm für obere und untere Außentemperatur.
TASTEN-FUNKTION
DowN/CF
Drücken Sie, um zwischen °C/°F umzuschalten oder um zurückzugehen, während
Sie im Einstellmodus sind
UP
Drücken Sie, um vorzurücken, während Sie im Einstellmodus sind
MAX/MIN
Drücken, um höchste und niedrigste Temperatur zu überprüfen. 2 Sekunden lang
gedrückt halten, um alle Temperaturaufzeichnungen zu löschen
ALERT
Drücken, um den Temperaturalarm ein-/abzuschalten. Halten Sie die „ALERT“-Taste
2 Sekunden lang gedrückt, um die Einstellung für den Temperaturalarm einzugeben
CHANNEL
Drücken, um den RF-Kanal (Funkfrequenzkanal - CH) zu wechseln, CH1 --> CH2 -->
CH3 --> CH1. Halten Sie die „Channel“-Taste 2 Sekunden lang gedrückt, um alle
Daten aus dem aktuellen „Channel“ zu löschen
BETRIEB
Einstellung des Temperaturalarms
1. Halten Sie die „ALERT“-Taste 2 Sekunden lang gedrückt, um zur ALERT-Einstellung zu wechseln
2. Einstellfolge: Obergrenze --> Untergrenze --> Beenden
3. Drücken Sie die „CHANNEL“-Taste, um beim Einstellen der Ober- und Untergrenze zu einem anderen
Kanal zu wechseln.
4. Die Standardeinstellung für die Obergrenze ist: + 70 °C, für die Untergrenze - 50 °C
5. Während der Einstellung blinkt die Anzeige mit 1Hz
6. Drücken Sie die „ALERT“-Taste, um das Ende des Einstellvorgangs zu bestätigen, und starten Sie
anschließend den nächsten Kanal.
7. Drücken Sie die „Nach-oben“-Taste einmal: Die Einstellung rückt eine Stufe vor; wenn die Taste 2
Sekunden lang gedrückt bleibt, rückt sie um 8 Stufen/Sekunden vor.
8. Drücken Sie die „Down/CF“-Taste einmal: Die Einstellung geht eine Stufe zurück; wenn die Taste 2
Sekunden lang gedrückt bleibt, geht sie um 8 Stufen/Sekunden zurück.
9. Das System beendet den Modus automatisch, wenn für die Dauer von 5 Sekunden keine Taste
gedrückt wird.
10. Der Alarm schaltet sich automatisch ein, wenn er eingestellt ist.
Einschalten und neu einstellen
Bei Einschalten und Neueinstellen volle LCD-Anzeige für 3 Sekunden --> „Beep“ --> geht 3 Minuten
nach Empfang des RF-Signals in Normalzustand über
RF-Empfangsfunktion
1. Nach Einlegen der Batterie und Überprüfung der Temperatur geht die Uhr automatisch für 3 Minuten
in den RF-Empfangszustand über.
2. Halten Sie im normalen Anzeigemodus die „Channel“-Taste 2 Sekunden lang gedrückt, um die
aktuellen Kanalinformationen zu löschen.
3. Wenn innerhalb von 35 Minuten kein Signal mit demselben ID-Code für den aktuellen Kanal
empfangen wird, zeigt die Temperatur dieses „CH“ „--.-“ an.
4. Nachdem das RF-Signal empfangen wurde, erklingt ein Ton und das Antennensymbol blinkt bis zum
Eingang der Daten.
For more information call (610) 489-5500 • Fax (610) 489-9100
[email protected] • www.hbinstrument.com
© H-B Instrument Company 2011 Form 0-663 Rev. 0