Winco Mfg. IV Pole and Attachment User Manual

Page 2

Page 2 of 8

006312

Revision F Date 10-22-13

JWC

●IV Pole Attachment

Models

5251, 5261, 5291, 5351, 5361, 5851, 5861, 6530, 6531, 6540, 6541, 6570, 6571

●Tools needed:

Phillips Head Screwdriver

7/16” wrench (multiple size wrench included)

Powered tools NOT recommended –

●Assembly Instructions

1. Locate the rear-side of the chair and place the

“IV U-Bracket Assembly” onto the rear chair
frame rail. (FIG.1)

2. Next insert the (2) 2¾” screws into the holes provided

on the bracket assembly. (FIG.2)

3. Secure the bracket to the chair frame using the (2)

nylon lock-nuts.

Tighten using the wrench provided. (FIG.3)

4. Insert the IV Pole.

Your chair should look like that of (FIG.4) when
assembly is complete.

FIG. 4

●Parts Included:

Description:

Qty.

Part Number

IV U-Bracket Assembly

227600 (LEFT)

227605 (RIGHT)

¼-20 Nylon Lock-nut (1-installed)

566204

¾” Phillips-head Screw (installed)

566504

2¾” Phillips-head Screw

566571

IV Pole

480500

FIG. 1

FIG. 3

NOTE:

Left & Right is determined – as if sitting

in the chair

FIG. 2

Pictures shown with 227600A OPTION