Winco Mfg. IV Pole and Attachment User Manual

Page 4

Page 4 of 8

006312

Revision F Date 10-22-13

JWC

●IV Pole Attachment

Models: 2570, 2571, 2572, 2573, 2574, 2575

●Tools needed:

Phillips Head Screwdriver

7/16” wrench (multiple size wrench included)

Powered tools NOT recommended –

●Assembly Instructions

6. Locate the proper location on the chair for the

“IV U-Bracket Assembly”. (FIG.1)

7. Insert the “IV Spacer” into the “IV U-Bracket”

(FIG.2) and place onto chair frame.

8. Insert the two screws through the holes in the

“IV U-Bracket”. (FIG.3)

9. Screw on the nylon lock-nuts and, using the wrench

provided, tighten the lock-nuts to the bracket. (FIG.3)

10. Your chair should look similar to that of (FIG.4)

NOTE:

Left & Right is determined – as if sitting

in the chair

●Parts Included:

Description:

Qty.

Part Number

IV U-Bracket Assembly

227600 (RIGHT)

227605 (LEFT)

IV Spacer

227607

1” Grey Cap

700700

¼-20 Nylon Lock-nut (1 installed)

566204

¾” Phillips-head Screw (installed)

566504

2¾” Phillips-head Screw

566571

IV Pole

480500

FIG. 1

FIG. 3

FIG. 4

FIG. 2