Winco DSE7300 Series - Manual (Page 111)

DSE7200 / 7300 Series Operators Manual
111
Front Panel Configuration Editor (continued)
Section Parameter as shown on display Settings
MAINS Mains Transient Delay 0m 0s
Return Delay Oh 0m 0s
Mains Transfer Time 0m 0.0s
TIMERS LCD Page Timer 0h 0m 0s
Auto Scroll Delay 0h 0m 0s
Pre Heat Timer 0m 0s
Crank Duration Timer 0m 0s
Crank Rest Timer 0m 0s
Safety On Delay 0m 0s
Smoke Limiting 0m 0s
Smoke Limiting Off 0m 0s
Warm Up Timer 0h 0m 0s
Cool Down Timer 0h 0m 0s
Speed Overshoot Delay 0m 0s
Fail To Stop Delay 0m 0s
Battery voltage Low Warning Delay 0h 0m 0s
Battery Voltage High Warning Delay 0h 0m 0s
Return Delay 0h 0m 0s
Generator Transient Delay 0s
Mains Transient Delay 0m 0s
Mains Transfer Time 0.0s
SCHEDULE Schedule Active / Inactive
Schedule On Load Active / Inactive (only available when Scheduler is active)
Schedule Period W eekly, Monthly, (only available when Scheduler is active
Schedule time and Date Selection (1-16) Press to begin editing then up or down when selecting the different parameters in the
scheduler.