Wilson Audio WATCH Dog Subwoofer Series-2 - Manual (Page 68)

68
Toggling the switch to the
remote position without a
twelve volt trigger connected
to that switch will potentially
result in your WATCH Dog
being improperly configured.
The trigger switch defaults
to the zero volt position with
nothing connected.
The trigger is designed
be attached to two-state, relay
switches which toggle
between zero volts and twelve
volts. Several Audio/Video
controllers feature twelve-volt
relay triggers, the status of
which are associated with
selected modes. These can be
used in conjunction with the WATCH
Dog relay switches to configure your
subwoofer ideally for those corre-
sponding modes. Similarly, control
systems such as Crestron, AMX and
others have the option for interfacing
with controllable devices via twelve-
volt relay triggers. Consult your
audio specialist or installer for more
details.
The twelve-volt triggers are
two-state switches: the presence of
zero volts (no voltage) on the input of
Figure 13
Figure 14