Wilson Audio WATCH Dog Subwoofer Series-2 - Manual (Page 27)

27
Section 4.0 - Initial Setup
We strongly recommend that a trained and certified Wilson Audio dealer assist
you in your home with the set up and placement of your WATCH Dog subwoofer. They
are well versed in Wilson Audio Setup Procedure (WASP) and the methods best used
with our products to provide you with the most satisfying results. In this section you
will find the necessary tools and information in the event dealer assistance is not avail-
able.
If you have not read the previous section on room acoustics, we recommend
that you do so now. It will provide you with valuable information for determining the
overall best speaker placements and listening position. This section contains informa-
tion on how to fully evaluate the acoustical qualities of your existing room in the prop-
er placement of your WATCH Dog as well as the placement of other speakers in your
listening environment.
System Setup
We recommend that you setup your multi-channel system as follows:
• Perform an acoustical analysis of your existing room.
• Find and mark the zones of neutrality for each of the speakers in
the WATCH system (more specific details are found below).
• Follow the setup procedures outlined in Section 5 and your left
and right channel owner’s manual.
• Perform the final system setup and fine tuning steps outlined in
Sections 5 and 6.
Zone of Neutrality
The zone of neutrality is a location in your room where the speakers will sound
I n i t i a l S e t u p