Wilkerson L30 - Manual (Page 2)

MAINTENANCE
1. The lubricator should remain trouble-free given clean operating
conditions. Contaminants from dirty oil can collect on bottom of
bowl or on siphon tube inlet filter. After tapping filter or bowl on a
hard surface, use an air gun to blow out residual dirt.
2. IF OIL DELIVERY RATE DROPS, clean lubricator. Shut off air
supply and reduce pressure inside lubricator to zero. Remove
Flow-Guide® variable orifice screw and clean its passage with a
small wire. Check orifice screw's bore for contaminants and clean it
if necessary. Be sure that passage downward from sight dome
cavity into Flow-Guide® variable orifice post is open. Remove
adjusting screw, clean needle and seat in body. Inspect and clean
passage from needle seat to siphon tube adapter.
3. Drain off contaminants that collect in bottom of bowl.
REPAIR KITS AND REPLACEMENT PARTS
O-Ring Repair Kit ............................................................ LRP-95-058
Liquid Level Switch Kit ..................................................... LRP-95-093
Bowl Assembly — No Guard ........................................... LRP-96-160
Plastic Petcock Kit ........................................................... LRP-95-181
Siphon Tube Assembly Kit .............................................. LRP-96-182
Flow-Guide® Variable Orifice Kit (3/4" Models) .............. LRP-95-189
Flow-Guide® Variable Orifice Kit (1" Models) ................. LRP-95-190
Sight Dome Kit ................................................................. LRP-95-249
Fill Plug Kit ....................................................................... LRP-95-253
O-Ring Kit for Adjusting Screw ....................................... GRP-95-255
Bowl O-Ring Kit .............................................................. GRP-95-256
Force-Fill Adapter ........................................................... GRP-96-394
Clamp Ring Assembly .................................................... GRP-96-404
Tamper-Resistant Kit ....................................................... LRP-95-587
Metal Gauge Bowl with Petcock ..................................... GRP-95-676
Sight Gauge Kit ............................................................... LRP-95-771
Bowl Guard ..................................................................... GRP-95-808
Plastic Bowl with Plastic Petcock and Bowl Guard ......... LRP-95-830
Plastic Bowl — No Drain ................................................. LRP-96-940
Auto-Fill™ Lubricator Adapter
(includes plastic bowl assembly) ................................. LRP-95-698
Check Ball and O-ring Kit ................................................ LRP-95-310
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE
PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED
ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
DAMAGE.
This document and other information from The Company, its subsidiaries
and authorized distributors provide product and/or system options for further
investigation by users having technical expertise. It is important that you
analyze all aspects of your application, including consequences of any
failure and review the information concerning the product or systems in the
current product catalog. Due to the variety of operating conditions and
applications for these products or systems, the user, through its own
analysis and testing, is solely responsible for making the final selection of
the products and systems and assuring that all performance, safety and
warning requirements of the application are met.
The products described herein, including without limitation, product features,
specifications, designs, availability and pricing, are subject to change by
The Company and its subsidiaries at any time without notice.
EXTRA COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FOR
INCLUSION IN EQUIPMENT / MAINTENANCE MANUALS THAT UTILIZE
THESE PRODUCTS. CONTACT YOUR LOCAL REPRESENTATIVE.
!