Viconics VZ7656F Wireless Installation Guide - Manual (Page 9)

9 | VZ7656F1000W Installation Guide
S2020E1000; outdoor air temperature sensor
This sensor can be used for:

Outside air temperature sensing with the sensor installed directly exposed to
the elements.

Sensor uses a water resistant NEMA 4 ABS enclosure for outdoor
applications.
WIRING S2000D1000, S2060A1000 and S2020E1000
Remote wiring 1 sensor Remote wiring 4 sensors
C
ONFIGURING AND
S
TATUS
D
ISPLAY
I
NSTRUCTIONS
Status display
The Terminal Equipment Controller features a two-line, eight-
character display. There is a low level backlight that is always
active and can only be seen at night.
When left unattended, the Terminal Equipment Controller has
an auto scrolling display that shows the current status of the
system.
Each item is scrolled sequentially with the back lighting in low level mode. Pressing any
key will cause the back light to come on to high level.
Manual scroll of each menu item is achieved by pressing the Yes (scroll) key repetitively.
The last item viewed will be shown on the display for 30 seconds before returning to
automatic scrolling. Temperature is automatically updated when scrolling is held.
10 K
10 K 10 K 10 K 10 K
Scom
DS
Scom
OS
Scom
RS
or or
Scom
DS
Scom
OS
Scom
RS
or or
(