Read commands compatible to ”cvc 3000 – VACUUBRAND VNC 2 E User Manual
Page 30
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999199 / 28/11/2012
0: remote operation off
1: remote operation on
1.......9: sensor quantity
1.......9: number of active sensor
0: remote module not connected
1: remote module connected
0: level sensor not connected
1: level sensor connected
0: fault indicator not connected
1: fault indicator connected
0: venting valve not connected
1: venting valve connected
0: coolant valve not connected
1: coolant valve connected
0: in-line valve not connected
1: in-line valve connected
0: VMS not connected
1: VMS connected
0: NT VARIO pump not connected
1: NT VARIO pump connected
0: acoustic signal off
1: acoustic signal on
0: autostart off
1: autostart on
0: pressure unit mbar
1: pressure unit Torr
2: pressure unit hPa
0: language German
1: language English
2: language French
0: VACUULAN
1: continuous pumping
2: vacuum control
4: RC 5/6 mangement
Description
unit according to preselections
1-100% or HI
process runtime
VACUU•LAN: runtime of pump since
last switching of the pump
Response
XXXX.X mbar/Torr/hPa
XXX%
XX:XX hh:mm
xxx/min
XX:XX hh:mm
XXXXXXXXXXXXXXXX
Function
actual vacuum
actual speed
time
LAN
pressure increase
LAN process time
preselected
at the controller
Command
IN_PV_1
IN_PV_2
IN_PV_3
IN_PV_4
IN_PV_5
IN_CFG
Read commands compatible to ”CVC 3000”