VACUUBRAND VNC 2 E User Manual
Page 23
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. Manual-no.: 999199 / 28/11/2012
Switching to ”continuous pumping” (Cont.pump) using the function menu (see
section „Menu structure of controller“, pg. 18)
➨
Operation of a vacuum pump using an in-line valve or direct switching of a pump
Settings in the program menu:
☞
Switch-off time (t Off): The duration of the process control (continuous pumping) can be preset.
☞
Limit pressure (Limit): Shut down of the pump, if the actual pressure has fallen below a preset
pressure limit ”Limit”, e.g. for drying chamber applications.
Program menu in basic mode Cont.pum when operating a valve or a pump
Cont.pum
t Off
t Off
off
Cont.pum
Limit
Limit
off
↵
↵
Esc