Table 4-2 – Cisco 7931G User Manual
Page 8
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
4-8
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
Note
The phone also has a Network Configuration menu that you access from the
Device Configuration menu. For information about the options on that menu, see
the
“Network Configuration Menu” section on page 4-32
.
Table 4-2
Network Configuration Menu Options
Option
Description
To Change
DHCP Server
IP address of the Dynamic Host
Configuration Protocol (DHCP) server
from which the phone obtains its IP
address.
Display only—Cannot configure.
BOOTP Server
Indicates whether the phone obtains its
configuration from a Bootstrap Protocol
(BootP) server instead of from a DHCP
server.
Display only—Cannot configure.
MAC Address
Unique Media Access Control (MAC)
address of the phone.
Display only—Cannot configure.
Host Name
Unique host name that the DHCP server
assigned to the phone.
Display only—Cannot configure.
Domain Name
Name of the Domain Name System
(DNS) domain in which the phone
resides.
1.
Unlock network configuration
options.
2.
Set the DHCP Enabled option to No.
3.
Scroll to the Domain Name option,
press the Edit softkey, and then enter
a new domain name.
4.
Press the Validate softkey and then
press the Save softkey.