Cisco 7931G User Manual
Page 15
4-15
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
PC VLAN
Allows the phone to interoperate with
3rd party switches that do not support a
voice VLAN. The Admin VLAN ID
option must be set before you can change
this option.
1.
Unlock network configuration
options.
2.
Make sure the Admin VLAN ID
option is set.
3.
Scroll to the PC VLAN option, press
the Edit softkey, and then enter a
new PC VLAN setting.
4.
Press the Validate softkey and then
press the Save softkey.
LLDP: PC Port
Enables and disables Link Layer
Discovery Protocol (LLDP) on the PC
port. Use this setting to force the phone
to use a specific discovery protocol,
which should match the protocol
supported by the switch. Settings
include:
•
Enabled—default
•
Disabled
Use Cisco Unified Communications
Manager Administration > Device >
Phone > Phone Configuration
LLDP-MED:
SW Port
Enables and disables Link Layer
Discovery Protocol Media Endpoint
Discovery (LLDP-MED) on the switch
port. Use this setting to force the phone
to use a specific discovery protocol,
which should match the protocol
supported by the switch. Settings
include:
•
Enabled—default
•
Disabled
Use Cisco Unified Communications
Manager Administration > Device >
Phone > Phone Configuration
Table 4-2
Network Configuration Menu Options (continued)
Option
Description
To Change