Cisco 7931G - Manual (Page 7)

4-7
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-3
• Unlocking and Locking Options, page 4-4
• Editing Values, page 4-5
• Network Configuration Menu, page 4-7
• Device Configuration Menu, page 4-17
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a
variety of network settings.
Table 4-2 describes these options and, where
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
“Displaying a Configuration Menu” section on page 4-3 .
Before you can change an option on this menu, you must unlock options as
described in the
“Unlocking and Locking Options” section on page 4-4 . The Edit,
Yes, or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the “Editing
Values” section on page 4-5 .
VLAN settings Admin. VLAN ID allows you to change the
administrative VLAN used by the phone. PC VLAN
allows the phone to interoperate with third-party
switches that do not support a voice VLAN. Admin. VLAN ID
PC VLAN
Port settings Allow you to set the speed and duplex of the network
and access ports. SW Port
Configuration
PC Port
Configuration
Table 4-1 Settings Configurable from a Cisco Unified IP Phone (continued)
Category Description
Network
Configuration Menu
Option