Triner Scale T-1000 TELESET User Manual

Page 9

Operator manual T-1000 TELESET

Using the T-1000 TELESET

Incorrect entries will be rejected and the
T-1000 will warn you with a beep signal.

Incorrect entries may be deleted with the ‘C’ key;
ie. the postage amount can be displayed.

4.2.1 Postage amount

The number keys on the keyboard are used to
input postage in dollars and cents. As you enter
an amount, the numbers will appear in the
display.

After entering a correct postage amount, confirm
your entry with the green key. The decimal point
will then appear in the display. Now just run your
envelope through from left to right.

If an amount is entered that cannot be printed,
the T-1000 will warn you with a beep. The most
recently used postage amount will then appear
in the display.

If the T-1000 beeps and the message ‘HP’ blinks
in the display, the high postage amount has been
exceeded. You may enter a new amount or
override the warning by pressing the ‘HP’ key.
For information on high postage amount, see
section 8.2.

4.2.2 Bulk Mail

Press the

oy¡o

key as often as necessary

until the desired bulk mail number is displayed.

For example, in the picture bulk mail number
4 is shown.

4.2.3 Changing the meter ad

Depending on what you’ve ordered, you may
choose from up to nine advertisements to
print. Because of the T-1000’s electronic
storage capabilities, printing your
advertisement is easier than ever.

1. On your machine, there is a label that

shows the different advertisements you
have ordered. Select the image you want
to use and find the number next to it.

2. Press the white ‘meter ad’ key to scroll

through the meter ad numbers. The
number you have selected will appear at
the bottom of the display in the
corresponding field.

3. Run your envelope through and the

chosen advertisement will be printed.

Note: You may want to run a test envelope
without postage by choosing the ‘0’ account
and running a ‘0.00’ dollar amount.