Triner Scale T-1000 TELESET User Manual
Page 8
11
10
Operator manual T-1000 TELESET
Using the T-1000 TELESET
4.1
Turning on the T-1000 TELESET
The T-1000 must be plugged into a grounded
outlet.
1. Insert the key into the keylock switch.
2. Turn the key to the I position. Short beep
signals will be heard. Now all segments of
the display will illuminate. The display of the
postage meter will show a dash running from
the right to the left side. This is concluded
with two beeps. Now all segments of the
display will illuminate, followed by another
beep. The current date is then displayed. After
approximately 3 seconds, the meter will beep
again and the last postage amount used will
appear in the display.
If the machine is not used for one minute the
time will be displayed.
4.2
Setting the imprint
All imprint settings are displayed in the
corresponding area of the display.
You may want to run a test envelope without
postage by choosing the ‘0’ account and running
a ‘0.00’ amount.
4
Using the T-1000 TELESET
Departmental account
Postage amount
Date
stamp
Meter ad
Type of