Triner Scale T-1000 TELESET - Manual (Page 13)

21 20
Operator manual T-1000 TELESET Departmental account function
1. Turn meter key to OFF position.
2. Press and hold the blue ‘ACCT’ key while
turning the meter key to the ON position.
3. Continue to hold the ‘ACCT’ key until the
meter beeps and M0 appears at the
bottom of the display.
4. You may now print the accounting report
by passing any piece of paper through the
machine.
5. To return to ready mode, press the yellow
‘HP’ key.
6.3 Clearing account information
1. Choose the account to be cleared by
pressing the ‘ACCT’ key.
2. To clear the number of pieces metered, hold
the ‘NR’ key and press the ‘C’ key at the
same time, the value for that department then
will be reset to zero.
3. To clear the amount of postage used, hold
the ‘SUM’ key and then press the ‘C’ key
at the same time, the amount for that
department will be reset to zero.
THE ‘0’ ACCOUNT
The grand total for all departments is stored
under the ‘0’ account. With the ‘0’ account you
can check the grand total of all departmental
accounts using the ‘NR’ and ‘SUM’ keys.
If you want to print postage, you must first select
an account numbered 1-9.
The zero account cannot be cleared directly,
but by clearing all other accounts (1-9), the
corresponding figures will be subtracted from
the ‘0’ account.
Account Pieces Amount ($) Meter Number: 123456
M1: 0 0,00 Date Printed: 04.01.95 / 00:09
M2: 0 0,00
M3: 0 0,00 R2: Postage used $ 0,00
M4: 0 0,00 R3: Total Postage $ 99900,00
M5: 0 0,00 R4: Total Pieces 0
M6: 0 0,00 R5: High Postage $ 20,00
M7: 0 0,00 R6: Limit Postage $ 300,00
M8: 0 0,00 R7: Status 00001
M9: 0 0,00 R8: Total Prints 4