Triner Scale T-1000 TELESET - Manual (Page 14)

23 22
Operator manual T-1000 TELESET Electronic postage scale
Your T-1000 postage meter can be connected
to an FP scale for automatic postage setting.
When the two machines are connected, you
simply place your mailpiece on the scale and
the postage amount is automatically
transferred to the T-1000. No need to set the
meter, just run your letter through for the
correct postage every time!
7.1 Connecting the T-1000 TELESET to
an FP scale
If you have an FP scale, it was delivered with
an interface cable. This cable connects both
machines through RS-232 serial interface
ports. Always disconnect power to both
machines before attempting to connect or
disconnect the interface cable. Never
manipulate the interface cable when either
machine is on.
7.2 Using the interface feature
To use the scale interface, simply press the
‘Scale’ key on the keyboard. To signal that the
interface feature is functioning, the
symbol will appear in the display. Now, as
soon as a letter is placed on the scale, the
postage information is automatically
transferred to the T-1000. The meter will beep
to notify you that the information was
received. The T-1000 will hold the amount
received until another amount is entered.
7 Electronic postage scale
Interface port