Top Flite TOPA0703 - Manual (Page 7)

7
ASSEMBLE THE WINGS
HINGE THE AILERONS
Start with the left wing so the assembly matches the
photos the fi rst time through.
❏
1. Lay a few paper towels on top of each other
and cut them into small squares. These paper towel
squares will come in handy for wiping away excess
epoxy throughout the assembly process (and will
save you from wasting whole paper towels).
❏ ❏
2. Separate the aileron and fl ap from the wing
by carefully peeling off the masking tape holding
them together. Use a paper towel square dampened
with naphtha lighter fl uid or similar solvent to remove
any glue left behind from the tape.
❏ ❏
3. If necessary, use a covering iron with a
covering sock to go over the wing, fl ap and aileron
to remove any wrinkles. The best method to remove
the wrinkles is to glide the iron over the covering until
KIT CONTENTS
1 - Fuselage
2 - Left wing
3 - Right wing
4 - Belly pan
5 - Left Stabilizer
6 - Right Stabilizer
7 - Stabilizer Joiner Tubes
8 - Rudder 9 - Fixed Tail Gear
10 - Innercooler Exhausts
11 - Turbo Charger Exhaust
12 - Cockpit Parts
13 - Wing Joiner Parts
14 - Fixed Main Gear
15 - Wheels
16 - Landing Gear Doors 17 - Fuel Tank
18 - Canopy
19 - Dummy Engine
20 - Spinner Nut
21 - Cooler Intake
22 - Cowl
1
6
2 4
9
10
11
12
13
14
16
15
17
18
19
20
21
8
7
3
5
22