Top Flite TOPA0703 - Manual (Page 6)

6
● The stabilizer and wing incidences and engine
thrust angles have been factory-built into this
model. However, some technically-minded modelers
may wish to check these measurements anyway.
To view this information visit the web site at www.
greatplanes.com and click on “Technical Data.” Due
to manufacturing tolerances which will have little
or no effect on the way your model will fl y, please
expect slight deviations between your model and the
published values.
KIT INSPECTION
Before starting to build, take an inventory of this kit
to make sure it is complete, and inspect the parts
to make sure they are of acceptable quality. If any
parts are missing or are not of acceptable quality, or if
you need assistance with assembly, contact Product
Support. When reporting defective or missing parts,
use the part names exactly as they are written in the
Kit Contents list.
Top Flite Product Support
3002 N Apollo Drive, Suite 1
Champaign, IL 61822
Ph: (217) 398-8970, ext. 5
Fax: (217) 398-7721
E-mail: airsupport@top-fl ite.com
ORDERING
REPLACEMENT PARTS
Replacement parts for the Top Flite Giant P-47D ARF are
available using the order numbers in the Replacement
Parts List that follows. The fastest, most economical
service can be provided by your hobby dealer or mail-
order company. Not all parts are available separately
(an aileron cannot be purchased separately, but is only
available with the wing kit). Replacement parts are not
available from Product Support, but can be purchased
from hobby shops or mail order/Internet order fi rms.
Hardware items (screws, nuts, bolts) are also available
from these outlets.
To locate a hobby dealer, visit www.top-fl ite.com
and click on “Where to Buy”. Follow the instructions
provided on the page to locate a U.S., Canadian or
International dealer.
Parts may also be ordered directly from Hobby
Services by calling (217) 398-0007, or via facsimile
at (217) 398-7721, but full retail prices and shipping
and handling charges will apply. Illinois and Nevada
residents will also be charged sales tax. If ordering
via fax, include a Visa or MasterCard number and
expiration date for payment.
Mail parts orders Hobby Services
and payments by 3002 N Apollo Drive, Suite 1
personal check to: Champaign IL 61822
Be certain to specify the order number exactly as
listed in the Replacement Parts List. Payment by
credit card or personal check only; no C.O.D.
If additional assistance is required for any reason
contact Product Support by e-mail at productsupport@
top-fl ite.com, or by telephone at (217) 398-8970.
Order
Number
Description
REPLACEMENT PARTS LIST
How to
purchase
Instruction manual
Missing pieces
Full-size plans
Fuselage TOPA1810
Wing Set TOPA1811
Stab / Elevators TOPA1812
Rudder TOPA1813
Cowl TOPA1814
Canopy TOPA1815
Landing Gear Wires TOPA1816
Contact
Product
Support
Not available
Contact
your
hobby
supplier
to
purchase
these
items
Order
Number
Description
How to
purchase
Gear Covers TOPA1817
Dummy Engine TOPA1818
Tailwheel Assy. TOPA1819
Spinner Hub TOPA1820
Decals TOPA1821
Stab Tubes TOPA1822
Contact
your
hobby
supplier
to
purchase
these
items
COMMON ABBREVIATIONS
Stab = Horizontal Stabilizer
Fin = Vertical Stabilizer
LE = Leading Edge
TE = Trailing Edge
" = Inches
mm = Millimeters
SHCS = Socket Head Cap Screw
mAh = Milliamp Hours (refers to the
usable capacity of a battery)
To convert inches to millimeters, multiply inches
by 25.4 (25.4mm = 1")