Toa SR-TP12 - Manual (Page 9)

9
5. INPUT CONNECTORS
SR-A12L, SR-A12S and SR-A18B (for Indoor use)
Figures below show the input connector arrangements of each speaker system. Since connector and screw
terminal are internally connected in parallel, either connector can be used for connection.
SR-A12L, SR-A12S SR-A18B
Pin No. SR-A12L, SR-A12S SR-A18B
1+ LOW + INPUT +
1- LOW - INPUT -
2+ HIGH + THROUGH
2- HIGH - THROUGH
The NEUTRIK NL4MP connector’s pins are wired as shown below.
The connector (connection cable side) suited to the NEUTRIK NL4MP is the NEUTRIK NL4FC.
Green LOW (+)
Black LOW (-)
Red HIGH (+)
White HIGH (-)
SR-A12LWP and SR-A12SWP (for outdoor use)
Figure below shows the speaker cable arrangement of each speaker system.