Toa HY-MT7 - Manual (Page 4)

Step 5. Connect the lines from the MT-200 to the speaker’s rear-mounted connector.
For cable connection, refer to the MT-200’s and the HX-7 Series speaker’s Operating Instructions.
Step 6. Replace the MT-200’s cover and tighten the screws.
Secure the removed cover with the 2 cover fixing screws.
Note
To ensure the splash-proof capability, press the cover firmly onto the gasket.
URL: http://www.toa.jp/
133-01-00038-00
5. SPECIFICATIONS
Applicable Speaker HX-7B, HX-7W, HX-7B-WP, HX-7W-WP
Finish Stainless, black, semi-gloss, paint
Dimensions 30 (w) x 70 (h) x 28 (d) mm (1.18" x 2.76" x 11.02")
Weight 140 g (0.31 lb)
Note : The design and specifications are subject to change without notice for improvement.
• Accessories
Hex head bolt M6 x 16 with spring and plain washers ....... 4
Plain washer for M8 ............................................................ 2
Nut for M8 ........................................................................... 2