Toa HX-7W-WP - Manual (Page 18)

18
Model No. HX-7B-WP HX-7W-WP
Enclosure Sealed type
Power Handling
Capacity
Continuous pink noise: 250 W (IEC60268-5: 350 W)
Continuous program: 750 W
Rated Impedance 8 Ω
Sensitivity 100 dB (1 W, 1 m)
Frequency Response 105 Hz – 20 kHz
Crossover Frequency 1.7 kHz
Directivity Angle Horizontal: 100º
Vertical : Depending on directivity angle mode
Speaker Component Low frequency : 13 cm (5.5") cone-type x 8
High frequency: Wave front control horn with compression driver x 4
Input Terminal M4 screw terminal (suplied with the terminal cover),
distance between barriers: 9 mm (0.35")
Water Protection IPX4 (Install with every speaker module tilted downward from the horizontal.)
Finish Enclosure Polypropylene, black Polypropylene, white
Punched net Surface-treated steel plate, black,
rust proof coating
Surface-treated steel plate, white,
rust proof coating
Dimensions 497 (w) x 664 (h) x 274 (d) mm (19.57" x 26.14" x 10.79")
Weight 30 kg (66.14 lb)
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Terminal cover ........................................... 1
Tapping screw 4 x 16 ................................. 4
Rubber gasket ........................................... 1
• Optional products
[HX-7B]
Matching transformer: MT-200*
Matching transformer adapter: HY-MT7
Speaker mounting bracket: HY-60DB-WP, HY-CN7B-WP, HY-TM7B-WP, HY-MS7B-WP
[HX-7W]
Matching transformer: MT-200*
Matching transformer adapter: HY-MT7
Speaker mounting bracket: HY-60DW-WP, HY-CN7W-WP, HY-TM7W-WP, HY-MS7W-WP
* HY-MT7 Matching Transformer Adapter is separately required.