Toa HX-5W-WP - Manual (Page 15)

15
13. MOUNTING BRACKET TYPES
The following mounting brackets are optional.
Consult the instruction manual enclosed with each bracket for details on their installation and use.
• Speaker Rigging Frames HY-PF1B, HYPF1W, and HY-PF1WP
Can be used to suspend the speaker system from high ceilings.
• Speaker Mounting Brackets HY-CW1B, HY-CW1W, and HY-CW1WP
Allow the speaker system to be mounted to a ceiling and its angle to be adjusted both vertically and
horizontally.
• Speaker Mounting Brackets HY-WM1B, HY-WM1W, and HY-WM1WP
Allow the speaker system to be mounted to a wall or ceiling and its angle to be adjusted vertically.
• Speaker Mounting Brackets HY-WM2B, HY-WM2W, and HY-WM2WP
Allow the speaker system to be mounted closely to a wall or ceiling. This type of mounting offers the
advantage of suppressing interference caused by sound reflecting from the wall or ceiling, resulting in better
sound clarity.
• Speaker Stand Adapter HY-ST1
Allows the speaker system to be installed on the ST-32 Speaker Stand or a speaker stand having a
mounting pipe diameter of 35 mm.
• Speaker Extension Brackets HY-CN1B, HY-CN1W, HY-CN1B-WP, and HY-CN1W-WP
Connect 2 speaker systems to allow directivity control for lower frequencies.
Speaker system
HX-5B HX-5W HX-5B-WP HX-5W-WP
Mounting bracket
Speaker rigging frames HY-PF1B
HY-PF1W
HY-PF1WP
Speaker mounting brackets HY-CW1B
HY-CW1W
HY-CW1WP
Speaker mounting brackets HY-WM1B
HY-WM1W
HY-WM1WP
HY-WM2B
HY-WM2W
HY-WM2WP
Speaker stand adapter HY-ST1
Speaker Extension brackets HY-CN1B
HY-CN1W
HY-CN1B-WP
HY-CN1W-WP
[Speaker systems and mounting brackets]
14. COMBINATION WITH THE MT-200 MATCHING TRANSFORMER
Using the optional MT-200 matching transformer allows the speaker system to be connected to a high-
impedance amplifier. This matching transformer is best for use when the distance between the amplifier and
speaker is very long, or when multiple speaker systems are parallel-connected to a single amplifier.
Regarding the procedure for mounting the transformer on the speaker, refer to the instruction manual
enclosed with the MT-200.