Toa H-3WP - Manual (Page 9)

9
Step 4. Set the front grille to the speaker so that the three stud screws align with the corresponding stud
receptacles, then push the grille onto the speaker.
Stud screw
(3 places indicated by arrow)
Front grille
6. REMOVING THE FRONT GRILLE
Step 1. Insert a slotted screw driver into each of the three
stud receptacles to widen a gap between the
grille and wall.
Step 2. Pull the grille by hand from the three positions
evenly and gradually.
Caution
If you pull only from one or two of the three
positions (stud receptacles), the front grille may
be damaged. Be sure to pull from the three
positions evenly and gradually.
2
1
Stud receptacle
(3 places)