Toa IR-802T - Manual (Page 14)

14
10. WHEN MOUNTING IN A RACk
Use the optional MB-15B-BK Half Width Blank Panel when installing the unit in a 19" rack (1 unit size.)
The MB-15B-BK consists of all the rack-mounting parts such as brackets and screws as shown below.
Be sure to remove the rubber feet located on the unit’s bottom surface before mounting.
11. VOlUME CONTROl COVER
To prevent the accidental change of the setting of the volume controls, remove the knobs after setting them to
the desired position and attach the optional cover instead.
IR-802T
3 x 14 tapping screw*
3 x 14 tapping screw*
Rack mounting bracket
Blank bracket
Fiber washer (for M5) 5 x 12 rack mounting screw
3 x 8 tapping screw
Input volume control knob
Volume control cover
(accessory)
* Secure the brackets with the screws supplied with the MB-15B-BK after removing the case holding screws,
which are no longer used.