Toa IR-802T - Manual (Page 13)

13
9. CONNECTIONS
DC24V
IR-820SP
Infrared Wireless Speaker
AC adapter
(accessory,
UL/cUL
approved
product)
To AC mains
From a school intercom system or
other paging equipment
Front
To ALD (Assistive Listening
Device) equipment
Category 5 cable (straight type)
PC
MP3 player
TV/DVD
IR-802T
Cable clip
AC adapter plug
Run the AC adapter
cable through this clip to
prevent its plug from
being removed.
CAUTION
• To avoid electrical shocks, be sure to switch off the IR-802T’s power when connecting the IR-820SP.
• To avoid damage to the IR-802T and/or connected equipment:
· Never connect the “TO IR-820SP” terminal to a PC or LAN.
· Never short-circuit this terminal to ground.
Notes
• Connect the “TO IR-820SP” terminal to the
IR-820SP Infrared Wireless Speaker using
a Category 5 cable (straight type).
• Use a Category 5 plenum cable (straight
type) when routing the cable in locations
where plenum-rated cable is required.
• Cross type cables cannot be used.
• The cable length must not exceed 50 m
(54.68 yd).