Toa IR-802T - Manual (Page 11)

11
8.2. Operation
8.2.1. When making microphone announcements
IR-200M
Infrared Wireless Microphone
IR-300M
Infrared Wireless Microphone
IR-802T
1
3
2
2
Step 1. Turn on the unit’s power switch.
The power indicator lights.
Step 2. Turn on the infrared wireless microphone’s power switch.
The reception indicator lights for the channel receiving a signal.
Step 3. Adjust the volume control knob for an appropriate output sound.
Notes
• Output signal distortion is more likely to increase when the volume control knob is set beyond the “7”
position.
• When a telephone paging call from a school intercom system or other paging equipment enters the
unit, the Mute indicator lights and the current broadcast being made from the unit is muted.
• Do not cover the microphone head with your hand(s), as doing so may cause acoustic feedback* to
occur.
* A phenomenon that squealing will occur when sound from the speakers enters the microphone, is
then re-amplified, and output through the speakers, forming a feedback loop.
Lights