Toa IR-702T - Manual (Page 6)

6
6. OPERATIONS
Note: The example here shows the operation of the Channel A. This operation also applies to the Channel B.
CH A VOLUME
IR
CH B VOLUME
POWER IR
OFF
ON
2
1
Power switch
Power switch
Infrared wireless microphone
IR-200M
Infrared wireless microphone
IR-300M
3
Volume control knob
Reception indicator
Step 1. Turn on the unit's power switch.
Step 2. Turn on the infrared wireless microphone's power switch.
The reception indicator lights for the channel receiving a signal.
Note
If the reception indicator does not light, the infrared wireless microphone is not set to the same
channel as that of the infrared wireless tuner. For channel settings, please refer to the instruction
manual enclosed with the infrared wireless microphone.
Step 3. Adjust the volume control knob for an appropriate output sound.
Note
Output signal distortion is more likely to increase as the volume control knob is rotated beyond the
"2-o'clock" position.