Toa IR-702T - Manual (Page 28)

* 1 0 dB = 1 V
* 2 Not supplied with the IR-702T KR. For the usable power supply cord and AC adapter, contact your nearest
TOA dealer.
URL: http://www.toa.jp/
18. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Power Source AC mains, 50/60 Hz (supplied from the included AC adapter)
Power Consumption 15 W or less
Receiving Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Receiver Sensitivity S/N ratio: over 50 dB (40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation)
S/N ratio 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted)
Tone squelch frequency 32.768 kHz
Infrared Receiver Input 75 Ω, BNC jack x 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals)
Output Channel A and B: –10 dB* 1 (±4.8 kHz deviation, at volume level max.), 600 Ω,
electronically balanced, 3 pole phone jack
Note: Channel A switchable to mixer output
Frequency Response 100 Hz – 12 kHz
Operating Temperature –10 to +50 °C (+14 to +122 °F)
Operating Humidity 30 to 85% RH
Finish Case: ABS resin, black
Dimensions 210 (w) x 44 (h) x 210.9 (d) mm (8.27" x 1.73" x 8.3")
Weight 630 g or 1.39 lb (unit itself)
AC adapter* 2 ..................................................... 1
Power cord (2 m or 6.56 ft)* 2 ............................. 1
Cord with a phone plug (1 m or 3.28 ft) ............ 1
Color label (6 colors) ......................................... 1
Rubber foot ....................................................... 4
• Optional product
Rack mounting bracket: MB-WT3
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany